Aluminum Radar Detector Mount BGX-2026 Compatible with Genevo MAX

About the BlendMount® BGX-2026 Custom Billet Aluminum Radar Detector Mount

The Genevo MAX is built for drivers who want compact, high-sensitivity detection without a messy windshield. The new BlendMount BGX-2026 is the Specialty Series mount that puts it where it belongs — on the rearview-mirror stem, not on a suction cup.

CNC-machined in California from black-anodized 6061-T6 aircraft aluminum, the BGX-2026 is a custom-fit clamp for select Volkswagen mirrors (Mirror ID VW-009, left-hand drive). It uses the MAX’s own hybrid magnet for a click-on / click-off connection, keeps the detector vibration-free, and leaves the glass clean. Factory look. Maximum coverage. No StickyCup.

The BlendMount BGX-2026 is the new Specialty 2026 Series mount built specifically for the Genevo MAX hybrid magnetic holder. Unlike the Standard 2001R clamp used on most American and Asian cylindrical stems, the 2026 Series is machined for a specific European-style mirror geometry — in this case, select Volkswagen models with auto-dimming mirrors and Mirror ID VW-009 (left-hand drive only).

The mount attaches to the rearview-mirror stem. You transfer the magnet from the MAX’s included magnetic holder onto the BlendMount, then snap the detector on and off in seconds. No suction cup. No windshield mark. No bouncing unit in heat or on rough pavement.

Multiple adjustment points set height, reach, and angle so the MAX sits in the dead space around the mirror: clear sightline for the driver, clear sky view for the MAX’s 5th-generation GPS (GPS / GLONASS / Galileo / QZSS), and a clean shot through the glass for radar and laser. Pair it with a BlendMount MirrorTap on auto-dimming mirrors and the power lead disappears behind the mirror and headliner.

Compatible BlendMount® Vehicle Mirror ID [Left Hand Drive Vehicle Only]

This BlendMount® BGX-2026 attaches securely to the rear-view mirror stem of select Volkswagen models with auto-dimming mirrors.

• Volkswagen Mirror ID: VW-009

Mount your Genevo MAX without the suction cup

• Custom Specialty 2026 clamp for Volkswagen Mirror ID VW-009 (LHD)
• Clamp size: 0.510"
• Uses the Genevo MAX hybrid magnetic holder (magnet transfers from the factory mount)
• Vertical or horizontal MAX orientation, same as Genevo’s own holder
• Multiple adjustments for placement, sightline, and GPS lock
• On and off in seconds — leave the mount on the mirror, take the detector with you
• Keeps the MAX from bouncing or falling off the glass
• No drilling, no modification, no damage to the stem
• Looks factory-installed
• Genevo MAX, magnetic insert, power cable, and MirrorTap not included

Why the BGX-2026 + Genevo MAX pairing works

• OEM-like integration — uses unused space around the mirror instead of the windshield
• Rock-solid stability — billet aluminum, no suction-cup sag in heat or on rough roads
• Optimal detection — positions the MAX high and forward for radar, laser, and 5th-gen GPS
• Clean power option — MirrorTap hides the lead on auto-dimming Volkswagen mirrors
• Built for this mirror — Specialty 2026 geometry, not a one-size cylindrical clamp

Key specifications

• SKU / Series: BGX-2026 (Specialty 2026)
• Detector: Genevo MAX (hybrid magnetic mount)
• Material: 6061-T6 aluminum, black anodized
• Clamp size: 0.510"
• Weight: 0.31 lbs
• Fitment: Volkswagen Mirror ID VW-009, left-hand drive only
• Origin: Designed, machined, and assembled in California, USA
• Typical Specialty Series price point: $179.99 (confirm at listing)

What’s included

• BGX-2026 radar detector mount
• Lock washer, flat washer
• Hex socket screws (6-32 x 5/16" and 6-32 x 1/2")
• 5" wire tie
• Touch pads
• 7/64" Allen wrench
• Instruction sheet

What’s not included
Genevo MAX radar detector, Genevo magnetic holder/insert, power cable, and MirrorTap. The magnet from the MAX’s included holder is required and transfers onto the BlendMount.

Built to last - Made in the U.S.A.

This adjustable, easy to install mount allows you not only an unimpeded field of vision, but maximum radar coverage, with a minimum of difficulty. The BlendMount® is manufactured, assembled and sold from our California headquarters, making customer service before and after your BlendMount® purchase a snap!

• A High Quality Mount Constructed Of Durable, Lightweight, Black Anodized Aircraft Grade Aluminum.
• Looks Factory-Installed!!!
• Endorsed by hundreds of professional installers in USA and Canada.
• Patented Design.
• 100% Designed and Manufactured in USA

About J28 Design Customer Service

• In-House Experts - We know our product.
• A+ BBB Accredited Business - Our in-house, California-based Tech Support team is available M-F via Live Chat or Phone at 1-888-497-8388
• 30 Day Money Back Guarantee.
• Fast Shipping via USPS or UPS.
• Shop with Confidence - Your information is safe. Secure Payment SSL.
• Accepted Forms of Payment - VISA, MasterCard, Discover, American Express, Amazon Pay, Paypal, Paypal Credits, Klarna

Shop Now. Pay Later With Klarna with 4 Interest Free Installments

• Step 1: Add products to your cart and select “Klarna” when you check out.
• Step 2: Enter a few personal details and you’ll know instantly if you’re approved.
• Step 3: Klarna will send you an email confirmation and reminders when it’s time to pay.
• Step 4: You can complete your future Klarna purchases with just one click.
  
  *CA residents: Loans made or arranged pursuant to a California Financing Law license.

Power your radar detector from your auto-dimming mirror for a clean installation

The MirrorTap® Power Cord simply plugs into the exposed wire harness on the rear face of your auto-dimming mirror. No cutting or splicing wires. The MirrorTap® is constructed of 26 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve. The MirrorTap® Power Cord is sold separately.

LHD Drive Vehicle